What Are the Procedures and Details of Installing the Toilet?
Whether the toilet is installed correctly is directly related to the safety and comfort of future use. Therefore, MWD has organized the following toilet installation procedures and details for you, hoping to help you.
1. Before installing the toilet, be sure to check it thoroughly to see if the drainpipe of the sewer is unobstructed and check whether the place where the toilet is installed is level. If it is not level, then it must be leveled when installing the toilet. In addition, a large section is generally reserved for the sewage pipe opening of the toilet, and the excess pipe is cut short, leaving about 3mm above the ground.
Also, check whether the size of the toilet you bought matches the space reserved in your home. After these inspections are completed, the toilet installation can begin.
2. Make a mark on the sewage pipe of the toilet and the sewage pipe of the sewer, determine the installation position of the toilet, drill a hole with an electric drill, and bury the expansion screw in it. Then install a sealing ring on the sewage outlet of the toilet, and install glue or cement slurry on the sewage pipe to ensure that the sewage will not penetrate out.
3. Align the toilet sewage pipe you marked with the sewer sewage pipe, install a toilet on the toilet, and install a sealing ring or glass glue at the bottom of the toilet to ensure that the toilet pipe can be connected to the nozzle of the sewer.
4. Install the parts or accessories of the toilet on it. Tighten the screws at the installation place of the toilet, install and debug the fittings of the water tank, and connect the water pipes in the toilet. Before that, be sure to check whether the switch of the water valve in your home is normal.
When checking whether the toilet water pipe connected to the water valve is normal, whether the length is long enough, etc., when installing the water pipe, it must be tight and there is no seepage. Although it is only some small details, the details determine the quality of the installation.
5. The toilet installation is basically over at this time. The rest of the time is to debug the toilet to see if the drainage pipe is smooth, whether it is blocked, and whether it can pump water normally. In addition, if you find that there are still some problems during the debugging process, you can refer to the manual to repair it. Generally, the toilet installation manual can explain in detail every possible problem and the solution when the toilet is installed.
MWD can provide you with a variety of specifications and models of sanitary ware products, and we will also arrange professional staff for service and docking according to your needs.
With professional manufacturing technology and excellent production technology, we have quickly become one of the leading toilet and accessories manufacturers. Our many years of experience and thoughtful service have won praise and trust from customers all over the world. We have a comprehensive quality inspection system and a comprehensive management team to control the process and details of the product in an all-around way. At the same time, we can also provide customized services in place according to the actual needs of customers. If you want to buy our toilet, please contact us immediately!